EasyManua.ls Logo

DMXking LeDMX4 MAX - 1. INTRODUCTION

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DMXking.com JPK Systems Limited New Zealand
0129-700-4.4
1
1. INTRODUCTION
Thanks for purchasing a DMXking product. Our aim is to bring you high quality products with great features we know you’ll
appreciate.
In many LED pixel installations, especially where the majority of pixels may be running simultaneously at full brightness, it is
necessary to inject DC power at various points along the pixel strip/string/array. Although the LeDMX4 MAX can only provide up
to 8A per output port terminal block this is not a limitation since currents higher than that will require power injection along the
strip anyhow.
HARDWARE AND FIRMWARE VERSIONS
From time to time minor hardware changes occur in our products usually small feature additions or unseen optimizations. The
table below lists LeDMX4 MAX product variants. Check the product label for P/N details.
Part Number
Feature addition
0129-1.0
Initial product release
Firmware updates are released on a semi-regular basis. We recommend updating to the latest available firmware version so all
product features are available. Please take note the user manual reflects latest firmware version features unless otherwise noted.
Firmware Version
Comments
V4.0
Initial release. RDM support disabled.
V4.1
Improved port LED intensity. Fixed startup hang with certain SD cards.
V4.2
DMX-IN recording issue fix. ArtNet subnet broadcast traffic issue fix resolves problem with being unable
to scan for (L)eDMX MAX units.
V4.4
Extension to 6 universes per pixel port. Problem with I/O port triggering resolved, earlier firmware
versions will not function correctly.

Related product manuals