MACHINE SPECIFICATIONS
MODEL SERIAL
NUMBER
NUMBER
VOLTAGE PHASE CYCLE
SAW BAND
LENGTH
FILE
BAND
LENGTH
(IF USED)
BELT
SIZES (IF USED)
DRIVE
AIR
PUMP
OIL
PUMP
DRIVEN SPEED INDICATOR
For your information and future reference, insert pertinent data concerning
your
machine in the spaces provided above. This information is stamped
on
the date
plate attached
to
the machine frame.
Always specify model and serial numbers
on
all parts orders and correspondence
concerning your machine.
inconvenience during processing.
The specifications contained herein
were
in effect at the time this manual
was
approved
for
printing. The
DoALL
Company, whose policy is
one
of
continuous
product improvement,
reserves
the right, however
to
change specifications
or
design
This will help avoid unnecessary delays and
at
any time without notice and without incurring obligations.
To Next Page
Loading...
