To Cancel
The following conditions will cancel the Normal
(Fixed Speed) Electronic Speed Control without
clearing the memory:
• The brake pedal is applied.
• The CANCEL button is pushed.
• The Electronic Stability Control/Traction Con-
trol System (ESC/TCS) activates.
• The vehicle parking brake is applied.
• The braking temperature exceeds normal
range (overheated).
• The gear selector is removed from the Drive
position.
To Resume Speed
To resume a previously set speed, push the
RES button and release. Resume can be used
at any speed above 19 mph (30 km/h).
To Turn Off
The system will turn off and erase the set speed
in memory if:
• The Normal (Fixed Speed) Electronic Speed
Control ON/OFF button is pushed.
• The ignition is turned off.
• The Adaptive Cruise Control (ACC) On/Off
button is pushed.
FORWARD COLLISION
WARNING (FCW) — IF
EQUIPPED
Forward Collision Warning (FCW)
Operation
The Forward Collision Warning (FCW) system
provides the driver with audible warnings, visual
warnings (within the DID), to warn the driver
when it detects a potential frontal collision. The
warnings are intended to provide the driver with
enough time to react, avoid or mitigate the
potential collision.
NOTE:
FCW monitors the information from the for-
ward looking sensors as well as the Elec-
tronic Brake Controller (EBC), to calculate
the probability of a forward collision. When
the system determines that a forward colli-
sion is probable, the driver will be provided
with audible and visual warnings.
When the system determines a collision with
the vehicle in front of you is no longer probable,
the warning message will be deactivated.
FCW Message
103
To Next Page
Loading...
