The electrical connections are all complete to
the vehicle but you must mate the harness to a
trailer connector. Refer to the following illustra-
tions.
Towing Tips
Before setting out on a trip, practice turning,
stopping, and backing up the trailer in an area
located away from heavy traffic.
Automatic Transmission — If Equipped
The DRIVE range can be selected when towing.
The transmission controls include a drive strat-
egy to avoid frequent shifting when towing.
However, if frequent shifting does occur while in
DRIVE, you can use the AutoStick shift control
to manually select a lower gear.
NOTE:
Using a lower gear while operating the ve-
hicle under heavy loading conditions will
improve performance and extend transmis-
sion life by reducing excessive shifting and
heat build up. This action will also provide
better engine braking.
Four-Pin Connector
1 — Female Pins
2—MalePin
3 — Ground
4 — Park
5 — Left Stop/Turn
6 — Right Stop/Turn
Seven-Pin Connector
1 — Battery
2 — Backup Lamps
3 — Right Stop/Turn
4 — Electric Brakes
5 — Ground
6 — Left Stop/Turn
7 — Running Lamps
264
To Next Page
Loading...
