• Longitudinal G-Force Fore and Aft
The longitudinal g-force measures the accelera-
tion and braking force of the vehicle.
• Peak G-Forces Fore Aft, Left and Right
This shows the maximum g-forces that have
been achieved since the last reset from the DID.
Peak values are maintained through ignition
cycles by the DID until they are cleared by the
driver.
• Vehicle Speed
Vehicle Speed measures the current speed of
the vehicle in either mph or km/h, starting at 0
with no maximum value.
• Steering Wheel Angle
Steering Wheel Angle utilizes the steering angle
sensor to measure the degree of the steering
wheel relative to zero. The zero degree mea-
surement indicates a steering wheel straight
ahead position. When the steering angle value
is negative, this indicates a turn to the left, and
when the steering angle value is positive, a turn
to the right.
Engine
When selected, this screen displays the follow-
ing values:
• Vehicle Speed
Shows the actual vehicle speed.
• Instantaneous Horsepower/Kilowatts
Shows the instantaneous horsepower.
• Instantaneous Torque
Shows the instantaneous torque.
• Oil Pressure
Shows the actual engine oil pressure.
• Gear (Automatic Transmission Only)
Shows the current (or pending) operating gear
of the vehicle.
PERFORMANCE CONTROL — IF
EQUIPPED
Your vehicle is equipped with a Performance
Control feature which allows for coordinating
the operation of various vehicle systems de-
pending upon the type of driving behavior de-
sired. The Performance Control feature is con-
trolled through the Uconnect radio and may be
accessed by performing any of the following:
• Pushing the Super Track Pack button on the
instrument panel switch bank.
• Selecting “Performance Control” from the
“Apps” menu.
• Selecting “Performance Control” from within
the Performance Pages menu.
Performance Pages — Engine
178
To Next Page
Loading...
