Dodge challenger 2016 - Setting the Following Distance in ACC

Setting The Following Distance In
ACC
The specified following distance for ACC can be
set by varying the distance setting between four
bars (longest), three bars (long), two bars (me-
dium) and one bar (short). Using this distance
setting and the vehicle speed, ACC calculates
and sets the distance to the vehicle ahead. This
distance setting displays in the DID.
To increase the distance setting, press the
Distance Setting — Increase button and re-
lease. Each time the button is pressed, the
distance setting increases by one bar (longer).
To decrease the distance setting, press the
Distance Setting — Decrease button and re-
lease. Each time the button is pressed, the
distance setting decreases by one bar (shorter).
If there is no vehicle ahead, the vehicle will
maintain the set speed. If a slower moving
vehicle is detected in the same lane, the DID
displays the “Sensed Vehicle Indicator” icon,
Distance Setting 4 Bars (Longest)
Distance Setting 3 Bars (Long)
Distance Setting 2 Bars (Medium)
Distance Setting 1 Bar (Short)
96