MAX A/C
MAX A/C sets the control for maximum cooling
performance.
Press and release to toggle between MAX A/C
and the prior settings. The button on the touch-
screen illuminates when MAX A/C is ON.
In MAX A/C, the blower level and mode position
can be adjusted to desired user settings. Press-
ing other settings will cause the MAX A/C
operation to switch to the prior settings and the
MAX A/C indicator will turn off.
Recirculation
When outside air contains smoke,
odors, or high humidity, or if rapid
cooling is desired, you may wish to
recirculate interior air by pressing
the Recirculation control button.
The recirculation indicator will illu-
minate when this button is selected. Press the
button a second time to turn off the Recircula-
tion mode and allow outside air into the vehicle.
NOTE:
In cold weather, use of recirculation mode
may lead to excessive window fogging. The
recirculation feature may be unavailable
(button on the touchscreen greyed out) if
conditions exist that could create fogging
on the inside of the windshield. On systems
with Manual Climate Controls, the Recircu-
lation mode is not allowed in Defrost mode
to improve window clearing operation. Re-
circulation will be disabled automatically if
this mode is selected. Attempting to use
Recirculation while in this mode will cause
the LED in the control button to blink and
then turn off.
Automatic Temperature Control
(ATC)
Automatic Operation
1. Push the AUTO button on the faceplate or
press the “AUTO” button on the touch-
screen.
2. Adjust the temperature you would like the
system to maintain by adjusting the driver
and passenger temperature buttons on the
faceplate or buttons on the touchscreen.
Once the desired temperature is displayed,
the system will achieve and automatically
maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the
temperature. You will experience the great-
est efficiency by simply allowing the system
to function automatically.
192
To Next Page
Loading...
