FLUIDS, LUBRICANTS, AND
GENUINE PARTS
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic
Additive Technology).
Engine Oil – 3.6L Engine We recommend you use API Certified SAE 5W-20 engine oil, such as MOPAR, Pennzoil, Shell
Helix or equivalent meeting the requirements of FCA Material Standard MS-6395 or ACEA A1/B1.
Refer to your engine oil filler cap for correct SAE grade.
SAE 5W-30 engine oil approved to FCA Material Standard MS-6395 such as MOPAR, Pennzoil or
Shell Helix may be used when SAE 5W-20 engine oil is not available.
Engine Oil – 5.7L Engine We recommend you use API Certified SAE 5W-20 engine oil, such as MOPAR, Pennzoil, Shell
Helix or equivalent meeting the requirements of FCA Material Standard MS-6395 or ACEA A1/B1.
Refer to your engine oil filler cap for correct SAE grade.
Engine Oil – 6.4L Engines We recommend you use Pennzoil Ultra 0W-40 engine or equivalent MOPAR oil meeting the FCA
Material Standard MS-12633 for use in all operating temperatures.
The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For
information on engine oil filler cap location, refer to “Engine Compartment” in “Maintaining Your
Vehicle” for further information.
Engine Oil Filter We recommend you use MOPAR Engine Oil Filter.
337
To Next Page
Loading...
