UCONNECT SETTINGS
The Uconnect system uses a combination of
buttons on the touchscreen and buttons on the
faceplate located on the center of the instru-
ment panel that allows you to access and
change the customer programmable features.
Buttons On The Faceplate
Buttons on the faceplate are located below the
Uconnect system in the center of the instrument
panel. In addition, there is a Scroll/Enter control
knob located on the right side. Turn the control
knob to scroll through menus and change set-
tings (i.e., 30, 60, 90), push the center of the
control knob one or more times to select or
change a setting (i.e., ON, OFF).
Your Uconnect system may also have a Screen
Off and Back buttons on the faceplate.
Push the Screen Off button on the faceplate to
turn off the Uconnect screen. Push the Screen
Off button on the faceplate a second time to turn
the screen on.
Push the Back button on the faceplate to exit
out of a Menu or certain option on the Uconnect
system.
Buttons On The Touchscreen
Buttons on the touchscreen are accessible on
the Uconnect display.
Customer Programmable Features
— Uconnect 5.0 Settings
Push the + MORE button on the faceplate and
then press the “Settings” button on the touch-
screen to display the menu setting screen. In this
mode the Uconnect system allows you to access
programmable features that may be equipped
such as Display, Units, Voice, Clock, Safety/
Assistance, Lights, Doors & Locks, Auto-On Com-
fort, Engine Off Options, Compass Settings, Au-
dio, Phone/Bluetooth, Restore Settings, Clear
Personal Data and System Information.
Uconnect 5.0 Buttons On Touchscreen And
Buttons On Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
Uconnect 8.4A/8.4AN Buttons On Touchscreen
And Buttons On Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
157
To Next Page
Loading...
