Dodge challenger 2016 - Page 155

Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read “Adaptive Cruise Control Ready.”
Push the SET + or the SET- button (located on
the steering wheel) and the following will display
in the DID:
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
• Distance Setting Change
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
• The DID will return to the last display se-
lected after five seconds of no ACC display
activity.
For further information, refer to “Adaptive
Cruise Control (ACC) — If Equipped” in “Under-
standing The Features Of Your Vehicle.”
Fuel Economy
Push and release the UP
or DOWN ar-
row button until the Fuel Economy Menu item is
displayed in the DID.
• Two submenu pages one with Current value
(instantaneous calculation of the fuel
economy) displayed and one without the
Current Value displayed (toggle the LEFT
or RIGHT arrow button to select one):
– Current Fuel Economy (MPG, L/100 km,
or km/l)
– Range To Empty (miles or km)
– Average Fuel Economy (MPG, L/100 km,
or km/l)
– The Max and Min values will correspond
to the particular engine requirements
• Lower end of gauge will be displayed in an
amber color and turn green as Fuel Economy
improves.
• Hold the OK button to reset average fuel
economy information.
Trip Info
Push and release the UP
or DOWN ar-
row button until the Trip Menu item is displayed
in the DID. Toggle the LEFT
or RIGHT
arrow button to select Trip A or Trip B. The
Trip information will display the following:
• Distance – Shows the total distance (mi
or km) traveled for Trip A or Trip B since the
last reset.
• Average Fuel Economy – Shows the average
fuel economy (MPG, L/100 or km/l) of Trip A
or Trip B since the last reset.
• Elapsed Time – Shows the total elapsed time
of travel since the last reset.
Hold the OK button to reset feature information.
152