NOTE:
To make changes to the ⴖDisplay Brightness
with Headlights ONⴖ setting, the headlights
must be on and the interior dimmer switch must
notbeintheⴖpartyⴖ or ⴖparadeⴖ positions.
• Display Brightness With Headlights OFF
When in this display, you may select the bright-
ness with the headlights off. Adjust the bright-
ness from (1–10) with the “+” and “–” buttons on
the touchscreen.
NOTE:
To make changes to the ⴖDisplay Brightness
with Headlights OFFⴖ setting, the headlights
must be off and the interior dimmer switch
must not be in the ⴖpartyⴖ or ⴖparadeⴖ posi-
tions.
• Set Theme
When in this display, you may select the theme
for the display screen. To make your selection,
press the "Set Theme" button on the touch-
screen, then select the desired theme option
button until a check-mark appears showing that
the setting has been selected.
• Set Language
When in this display, you may select one of
multiple languages (Brasileiro/Deutsch/English/
Español/Français/Italiano/Nederlands/Polski/
Português/Türk/Pусский) for all display nomen-
clature, including the trip functions and the
navigation system (if equipped). Arabic, if avail-
able, can be selected for navigation audible
prompts and map information. Press the “Set
Language” button on the touchscreen, then
press the desired language button on the touch-
screen until a check-mark appears next to the
language, showing that setting has been
selected.
• Touchscreen Beep
When in this display, you may turn on or shut off
the sound heard when a touchscreen button
(button on the touchscreen) is pressed. Press
the “Touchscreen Beep” button on the touch-
screen until a check-mark appears next to the
setting, showing that setting has been selected.
• Control Screen Time-Out — If Equipped
When this feature is selected, the Controls
Screen will stay open for five seconds before
the screen times out. With the feature dese-
lected, the screen will stay open until it is
manually closed. Press the “Control Screen
Time-Out” button on the touchscreen until a
check-mark appears next to the setting, show-
ing that setting has been selected.
• Navigation Turn-By-Turn In Cluster — If
Equipped
When this feature is selected, the turn-by-turn
directions will appear in the Driver Information
Display (DID) as the vehicle approaches a
designated turn within a programmed route. To
make your selection, press the “Navigation
Turn-By-Turn In Cluster” button on the touch-
screen, until a check-mark appears next to the
setting, showing that setting has been selected.
166
To Next Page
Loading...
