The BSM system is designed not to issue an
alert on stationary objects such as guardrails,
posts, walls, foliage, berms, etc. However, oc-
casionally the system may alert on such ob-
jects. This is normal operation and your vehicle
does not require service.
The BSM system will not alert you of objects
that are traveling in the opposite direction of the
vehicle in adjacent lanes.
WARNING!
The Blind Spot Monitoring system is only an
aid to help detect objects in the blind spot
zones. The BSM system is not designed to
detect pedestrians, bicyclists, or animals.
Even if your vehicle is equipped with the
BSM system, always check your vehicle’s
mirrors, glance over your shoulder, and use
your turn signal before changing lanes. Fail-
ure to do so can result in serious injury or
death.
Rear Cross Path — If Equipped
The Rear Cross Path (RCP) feature is intended
to aid the drivers when backing out of parking
spaces where their vision of oncoming vehicles
may be blocked. Proceed slowly and cautiously
out of the parking space until the rear end of the
vehicle is exposed. The RCP system will then
have a clear view of the cross traffic and if an
oncoming vehicle is detected, alert the driver.
Overtaking/Passing
Stationary Objects
Opposing Traffic
71
To Next Page
Loading...
