Dodge Durango - Warning Lights and Messages

14 GETTING TO KNOW YOUR INSTRUMENT PANEL
Screen Setup
Push and release the up or down arrow
button until the Screen Setup Menu icon/title is
highlighted in the instrument cluster display.
Push and release the OK button to enter the
submenus and follow the prompts on the
screen as needed. The Screen Setup feature
allows you to change what information is
displayed in the instrument cluster as well as
the location that information is displayed.
Screen Setup Driver Selectable Items
Favorite Menus
 Main Gauge
 Vehicle Info
 Performance (Show/Hide)
NOTE:
Menus with (show/hide) can push the OK
button to choose whether to show or hide this
menu on the instrument cluster display.
Diagnostics — If Equipped
Push and release the up or down arrow
button until the Diagnostics icon/title is
highlighted in the instrument cluster display.
Push and release the OK button to display the
diagnostic trouble codes and descriptions.
When the end of the list is reached, “No
Diagnostic Codes at this Time” will appear in the
instrument cluster display.
Speed Warning — SRT
Push and release the up or down arrow
button until the Speed Warning Menu icon/title
is displayed in the instrument cluster display.
Push and release OK to enter speed warning.
Use the up or down arrow button to select
a desired speed, then push and release OK to
set the speed. The white passive speed limiter
telltale will light up with a notification text
message (Speed Warning Set to XX, followed by
the selected speed units). When the set speed
is exceeded, an audible chime will sound until
the speed is no longer exceeded. The white
passive speed limiter telltale will turn yellow
and will flash, and a pop up message of “Speed
Warning Exceeded” will display.
NOTE:
You can turn the Speed Warning off by using the
up /down arrow button to scroll through
speed list and select OFF at the bottom of the
list.
WARNING LIGHTS AND MESSAGES
The warning/indicator lights will illuminate in
the instrument panel together with a dedicated
message and/or acoustic signal when
applicable. These indications are indicative and
precautionary and as such must not be
considered as exhaustive and/or alternative to
the information contained in the Owner’s
Manual, which you are advised to read carefully
in all cases. Always refer to the information in
this chapter in the event of a failure indication.
All active telltales will display first if applicable.
The system check menu may appear different
based upon equipment options and current
vehicle status. Some telltales are optional and
may not appear.
21_WD_S_SU_EN_USC_t.book Page 14