64 TECHNICAL SPECIFICATIONS
ENGINE FLUIDS AND LUBRICANTS
Component Fluid, Lubricant or Genuine Part
Engine/Intercooler Coolant
We recommend you use Mopar Antifreeze/Coolant 10 Year/
150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology)
that meets the requirements of FCA Material Standard MS.90032.
Engine Oil
For best performance and maximum protection under all types of
operating conditions, FCA only recommends full synthetic engine oils that
meet the American Petroleum Institute (API) categories of SN.
FCA recommends the use of Pennzoil Ultra Platinum 0W-40 or equivalent
Mopar engine oil meeting the requirements of FCA Material Standard
MS-12633 for use in all operating temperatures.
Engine Oil Filter
We recommend you use a Mopar Engine Oil Filter. If a Mopar Engine Oil
Filter is unavailable only use filters that meet or exceed SAE/USCAR-36
Filter Performance Requirements.
Fuel Selection
Premium Unleaded 91 Octane Only or Higher (R+M)/2 method, 0-15%
ethanol (Do not use E-85).
21_WD_S_SU_EN_USC_t.book Page 64
To Next Page
Loading...
