12
CHARGING THE BATTERY
The Dogtra YS600 uses a lithium polymer battery.
Recharge the unit if the indicator light is red or does not
come on or the system will not stay on when any button
is pressed.
NOTE 1: Only use Dogtra-approved batteries, chargers,
and accessories for your Dogtra e-collars. This will
prevent any damage that can be incurred from
attempting to use a different charger.
NOTE 2: The unit has a partial charge when it leaves the
Dogtra facility. Upon receipt of the system, be sure to
give it a full 2-hour initial charge before the first use away
from any flammable substances.
NOTE 3: When a charger is not in use, disconnect it from
the power source. Fully charge the batteries if the unit is
to be stored without use for a period of 3 months or
more.
To Next Page
Loading...
