Dolmar PS-35 C - Technical Data

19
Stroke volume cu. in (cm)
3
2.1 (35)
Bore inch (mm) 1.50 (38)
Stroke inch (mm) 1.20 (30.6)
Max. power at speed hp / rpm 2.3 / 10.000
Max. torque at speed Nm /rpm 2.0 / 7.000
Idling speed / max. engine speed with bar and chain rpm 2.800 / 13.100
Coupling speed rpm 4.100
Sound pressure level at the operator´s ear
according to ISO 22868 dB(A) 101,7
Carburetor Type diaphragm carburator
Ignition system Type electronic
Spark plug Type NGK CMR6A
or spark plug Type --
Electrode gap inch (mm) .023 (0,6)
Fuel consumption at max. load per ISO 7293 kg/h 0,68
Specic consumption at max. load per ISO 7293 g/kWh 500
Fuel tank capacity oz 13,5
Chain oil tank capacity oz 9,5
Mixture ratio (fuel/two-stroke oil)
- when using DOLMAR High Performance oil 50 : 1
- when using other synthetic oils (oil quality must be JASO FC or ISO EGD) 50 : 1
Chain brake engages manually or in case of kickback
Sprocket pitch inch 3/8
Number of teeth Z 6
Chain type see the Extract from the spare-parts list
Pitch / gauge inch / (mm) 3/8 / 0,050 (1,3) / 3/8 / 0,043 (1,1)
Guide bar, length of a cut inch / (cm) 12, 14, 16 (30, 35, 40)
Guide-bar type see the Extract from the spare-parts list
Weight (fuel tank empty, without chain, guide bar and accessories) lbs 9.70 9.92
WARNING:
This chain saw is capable of severe kickback that coult result in serious injury to the user. Do not operate this chain
saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback.
Chain saws with signicantly reduced kickback potential are available.
Technical data
PS-35 C PS-35 C TLC