Dolmar PS-35 C - Page 46

46
Extract from the spare parts list
Use only original DOLMAR parts. For repairs and
replacement of other parts, see your DOLMAR service center.
Pos. DOLMAR-No. Qty. Denomination
1 412 030 661 1 Sprocket nose bar 3/8”, 30 cm, 1,3 mm (12”)
412 035 661 1 Sprocket nose bar 3/8”, 35 cm, 1,3 mm (14”)
412 040 661 1 Sprocket nose bar 3/8”, 40 cm, 1,3 mm (16”)
2 528 092 046 1 Saw chain 3/8” for 30 cm, 1,3 mm
528 092 052 1 Saw chain 3/8” for 35 cm, 1,3 mm
528 092 056 1 Saw chain 3/8” for 40 cm, 1,3 mm
1 412 030 611 1 Sprocket nose bar 3/8”, 30 cm, 1,1 mm (12”)
412 035 611 1 Sprocket nose bar 3/8”, 35 cm, 1,1 mm (14”)
2 511 290 046 1 Saw chain 3/8” for 30 cm, 1,1 mm
511 290 052 1 Saw chain 3/8” for 35 cm, 1,1 mm
1 412 030 061 1 Sprocket nose bar 3/8”, 30 cm, 1,3 mm (12”)
412 035 061 1 Sprocket nose bar 3/8”, 35 cm, 1,3 mm (14”)
412 040 061 1 Sprocket nose bar 3/8”, 40 cm, 1,3 mm (16”)
2 528 092 046 1 Saw chain 3/8” for 30 cm, 1,3 mm
528 092 052 1 Saw chain 3/8” for 35 cm, 1,3 mm
528 092 056 1 Saw chain 3/8” for 40 cm, 1,3 mm
1 412 030 211 1 Sprocket nose bar 3/8”, 30 cm, 1,1 mm (12”)
412 035 211 1 Sprocket nose bar 3/8”, 35 cm, 1,1 mm (14”)
2 511 290 046 1 Saw chain 3/8” for 30 cm, 1,1 mm
511 290 052 1 Saw chain 3/8” for 35 cm, 1,1 mm
3 952 010 130 1 Chain protector for 30-35 cm (3/8”)
952 010 140 1 Chain protector for 40 cm (3/8”)
4 941 713 160 1 Universal wrench SW 16/13
6 944 340 001 1 Carburetor screwdriver
7 165 114 040 1 Suction head
8 185 114 200 1 Fuel tank cap, cpl.
9 963 229 036 1 O-Ring 29,3 x 3,6 mm
10 195 160 050 1 Return spring pack, complete
11 195 160 030 1 Spring
12 195 160 020 1 Driver
13 195 160 060 1 Starter cable 3x900 mm
14 965 603 040 1 Spark plug
15 185 114 200 1 Oil tank cap, cpl.
16 963 229 036 1 O-Ring 29,3 x 3,6 mm
17 165 173 010 1 Air lter
18 165 213 200 1 Sprocket guard, cpl.
165 213 160 1 Sprocket guard (with fast tensioner), complete
19 185 232 020 2 Hexagonal nut M8
20 165 223 110 1 Clutch drum cpl. 3/8“, 6-tooth
21 165 224 080 1 Shim washer
22 165 223 070 1 Circlip
23 165 174 170 1 Spark arrester screen
Accessories (not delivered with the chain saw)
25 953 100 090 1 Chain gauge (492)
25 953 100 290 1 Chain gauge (290)
26 953 004 010 1 File handle
27 953 003 100 1 Round le, dia. 4,5 mm
28 953 003 090 1 Round le, dia. 4,0 mm
29 953 003 060 1 Flat le
30 953 030 020 1 File holder
(with round le dia. 4,5 mm)
31 953 030 010 1 File holder
(with round le dia. 4,0 mm)
32 940 827 000 1 Offset screwdriver
- 949 000 035 1 Combined can
(for 5l fuel, 3l chain oil)
PS-35 C
PS-35 C TLC