_____________________________________________________________________________________
49
ENiQ AccessManager® Compact, ENiQ AccessManager® Terminal Compact
and ENiQ AccessManager® ITT:
The lower LED flashes green briefly twice and long once, emitting an acoustic
signal each time. Then the upper LED lights up red, green, yellow, blue and violet
in succession for initialisation. Finally, the upper LED flashes red briefly three
times, emitting an acoustic signal each time, and is then lit red permanently.
Connected ENiQ
®
Passive Readers:
If several readers are connected, these are recognised in succession by the
ENiQ AccessManager®. The upper LED lights up red, green, yellow, blue and
violet in succession for initialisation on the reader that has just been recognised.
Then the upper LED flashes red three times, emitting an acoustic signal each
time.
This process is repeated once per reader. Until all the readers connected have
been recognised, the two LEDs flash alternately in the signal sequence in red
and violet. Once all the readers have been recognised, the upper
LEDs on all the readers connected are then lit red permanently.
Connected ENiQ
®
Module Reader:
The status LED of the reader goes off and the control LED is lit red
permanently. No flashing sequence is emitted.
The ENiQ AccessManager® has been put into operation.
ENiQ
®
Access Manager
To Next Page
Loading...