Installation Guide YAMORC YD9401 – Upgrade Module
Step 1 - prepare for the upgrade
The first step is to prepare the necessary products before starting the upgrade:
• YD9401 module upgrade.
• Operating DR5000 panel.
• Good and safe Meanwell desktop- or plug-in power supply 18VDC or 15VDC (see YD7001 manual).
• LAN cable which is connected to your own internet through your provider's router.
• USB Mini kabel.
• Computer with Windows 10 or 11 with an active Internet connection and a free USB port.
• Your e-mail program to receive the unlock codes.
• Phillips screwdriver.
• Degreaser of your choice (not required, you can also use without)
This manual is offered to you by Domburg Train Support in collaboration with Drenth Design & Consulting www.domburgtrainsupport.nl Page 4
To Next Page
Loading...
