CoolFreeze Operation
17
6.6 Setting the temperature
➤ Press the “SET” button (fig. 2 4, page 3) once.
➤ Use the “UP +” (fig. 2 6, page 3) and “DOWN -” (fig. 2 7, page 3) buttons to
select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current tempera-ture is displayed again.
6.7 Switching off the cooler
➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
6.8 Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the vaporiser. This
reduces the cooling capacity. Defrost the device in good time to avoid this.
A
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the cover open.
➤ Wipe off the defrosted water.
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
CF80_CF110-O-US.book Seite 17 Mittwoch, 10. Mai 2017 6:22 18
To Next Page
Loading...
