Dometic RM2356 - Airing Position Card; Condensation Control; Replacing the Interior Light

“More information https://www.caravansplus.com.au"
AIRING POSITION CARD
Use the
Airing
Position Card
to
keep
the doors
ajar
if
the
refrigerator
will
not be
in
use
for an extended
period
of time
or
put
in
storage.
RM2456 RM2556 RM4606
RM4806
CONDENSATION CONTROL
HEATING CABLE
(RM4606
&
RM4806)
During
the summer months of
high
temperatures
and
humidity,
the metal frame between the freezer and fresh food
compart-
ments
may
have water
dropicts forming.
'This
refrigerator
comes standard with a
12V
DC
heating
cable that
will
evapo-
rate the water
droplets
when
they
form.
To
have the
heating
cable
on,
you position
the switch located
beneath the control
panel
to
I,
see
Fig,
2. The
heating
cable can be
left
on
continuously
or
only
used
when
temperatures
or
himidity
require
It.
Fig.
2
LY
tinuously
when in the ON
(ID
position.
It should be
The
heating
cable wil draw 12V DC
power
con-
turned off when a
charging
source is not available.
REPLACING
THE
INTERIOR LIGHT
If the interior
light
in the
refrigerator
is
faulty, you
can
change
the
PCB/LED
board. To order
a
replacement
PCB/LED
board,
please
contact the Dometic service
partner
in the
respective
country.
To
Change
the
PCB/LED
board,
proceed
as
follows:
1. Disconnect the
power supply
to the device.
2. Remove the
lamp
cover
by
pressing
the side
clip
1.
3. Remove the 2 screws.
4. Remove the defective PCB/LED board.
5. Mount the new PCB/LED board.
6. Fasten it
with
the
2
screws.
7, Attach the
lamp
cover
2.
8. Reconnect the
power supply.
1
#2
13