Dometic RM3604 User Manual

Dometic
®
MANUAL
Refrigerators
43
Press the TEMPERATURE SELECTOR button (4) until
the lamp (F) at the desired position is illuminated.
GAS MODE (3-WAY MODEL)
Press the DC mode button (2) to the UP (OFF) position.
Move the AUTO mode selector button (3) to the UP
position. The GAS mode indicator lamp (C) will illumi-
nate. After 45 seconds the burner should be ignited and
operating normally.
On the initial refrigerator start-up, it may take longer
than 45 seconds to allow air to be purged from the gas
line. If the gas does not ignite within 45 seconds, the
CHECK indicator lamp (E) will illuminate and the GAS
mode indicator lamp (C) will go off. To reset when the
CHECK indicator lamp (E) is illuminated, press the main
power ON/OFF button (1) to the OFF and then ON
position.
NOTE: DO NOT continue to reset GAS operation if
the CHECK indicator lamp continues to be illumi-
nated after several tries.
Press the TEMPERATURE SELECTOR button (4) until
the lamp (F) at the desired position is illuminated.
DC MODE (3-WAY MODEL ONLY)
Press the DC mode indicator button (2) to the DOWN
position. (Lamp [A] will light).
Press the TEMPERATURE SELECTOR button (4) until
the lamp (F) at the desired position is illuminated.
The refrigerator will continue to operate in the DC mode
until switch (2) is moved to the UP position.
Turn off the refrigerator or move the DC selector
button (2) to the UP/OFF position. The DC mode
over-rides all the other operating modes. Discharg-
ing of the battery will occur if the vehicle engine is
not running.
TEMPERATURE SELECTOR
The temperature selector on the refrigerator controls
both the gas and electric operation, thereby eliminating
the necessity of resetting each time a different energy
source is employed.
After the intial start-up, the temperature selector should
be moved from "COLDEST" to the desired temperature
setting, which is usually about mid-setting.
TO SHUT OFF THE REFRIGERATOR
The refrigerator may be shut off while in any mode of
operation by pressing the main power ON/OFF button
(1) to the UP (OFF) position. This shuts off all DC power
to the refrigerator, including the interior light.
AUTO MODE
Press the Auto mode selector button (2) to the DOWN
position. Lamp (B) will illuminate. If 120 volts is
available, the AC mode indicator lamp (A) will illumi-
nate indicating AC operation. If 120 Volts AC is not
available, the GAS indicator lamp (C) will illuminate,
indicating the control has automatically switched to
the GAS mode.
If the CHECK indicator lamp (D) illuminates and the
GAS mode indicator lamp (C) is off, the controls have
failed to ignite the burner in the GAS mode. GAS
operation may be reset by pressing the main power
ON/OFF button (1) to the OFF then ON position. (See
Step 2 under GAS MODE).
Press the TEMPERATURE SELECTOR button (3)
until the lamp at the desired position is illuminated.
4D. ELITE REFRIGERATOR OPERATION
(2-WAY) MODELS INCLUDE: RM4872
ON
OFF
AUTO
AC GAS
1
2
CHECK COLD 1 2 3 4 5 COLDEST
3
B
C
A E
D
2-WAY DISPLAY PANEL

Dometic RM3604 Specifications

General

Brand	Dometic
Model	RM3604
Category	Refrigerator
Language	English