Dometic
®
MANUAL
Refrigerators
91
Remove all screws securing the refrigerator into the
cabinet and slide the refrigerator out approximately 2–4
inches. Clean the metal frame and foil-backed insulation
around the refrigerator. Apply a foil-backed adhesive
tape to the joint between outer frame and foil-backed
refrigerator insulation. Refer to illustration top of page
22.
Make sure the refrigerator is dry and that the surface
temperatures are above 50°F. Use a clear silicon
caulking compound and seal the seam between the
refrigerator's plastic liner and the metal frame. Apply the
silicon in a continuous bead around both the refrigerator
freezer and food compartments.
NOTE: TO FORM A PROPER SEAL, IT IS IMPOR-
TANT NOT TO LEAVE ANY GAPS.
DOUBLE DOOR
REFRIGERA-
TOR
SHOWN WITH
DOORS
REMOVED
NOTE: TO FORM A PROPER SEAL, IT IS
IMPORTANT NOT TO LEAVE ANY GAPS.
To Previous Page
Loading...
Need help?
General
