Domino G20I Guide

EPT052026 Issue 1 February 2019 (15)
Set message ^1M01CS`@0`*x
`@1`*y`@2`*z`@3`
*p`@4`*r`@5`*q\0
*x: Message string for line
1. Range = 0-100
characters.
*y: Message string for line
2. Range = 0-100
characters.
*z: Message string for line
3. Range = 0-100
characters.
*p: Message string for line
4. Range = 0-100
characters.
*r: Message string for line
5. Range = 0-100
characters.
*q: Message string for line
6. Range = 0-100
characters.
To insert a variable item
into the message:
Counter = Cx with x: 0-5
Shift code = Sx with x: 0-
2
BoxLot = Sxy with x: 0, y:
0-3
Time = T
Date = Dx with x: 0-4
Expire date = Ex with x:
0-4
Barcode = R
Logo = Lx with x: 0-3
Note: Stop printing
before sending the
message.
^1M01CS`@0`ABC`@1`XYZ`@2`I
HG`@3`WER`@4`TUV`@5`OPQ\0
= Print “ABC” on line 1, “XYZ”
on line 2, “IHG” on line 3,
“WER” on line 4, “TUV” on line 5
and “OPQ” on line 6.
To insert a counter to line 1 of
message that has been setup
with counter setup command,
use this command:
^1M01CS`@0`CounterSample:
`C0`. Time: `T`. Date: `D0`. Expire
date:
`E0``@1`XYZ`@2`IHG`@3`WER`@
4`TUV`@5`OPQ
8080
Table 1: PC to Printer
Operation Command Parameter Examples UDP Port

Domino G20I Specifications

General

Brand	Domino
Model	G20I
Category	Printer
Language	English