Domino G20I Guide

(20) EPT052026 Issue 1 February 2019
Static barcode
setup
^1g01CS*x*y*z*
w*p\0
*x=0: Set the barcode
type to Code39.
*x=1: Set the barcode
type to Code2of5.
*x=2: Set the barcode
type to Code128.
*x=3: Set the barcode
type to Code93.
*x=4: Set the barcode
type to CodeUPC-A
*x=5: Set the barcode
type to CodeEAN.
*x=6: Set the barcode
type to CodaBar.
*x=7: Set the barcode
type to Code11.
*y: Set the barcode width,
range 1-4.
*z: Set the barcode
height, range 1-3.
*w=0: Disable human
readable text.
*w=1: Enable human
readable text.
*p = barcode data.
Maximum length, 30
characters.
^1g01CS0331BARCODE39\0
=
Set barcode type as Code39.
Set barcode width to 3.
Set barcode height to 3.
Enable human readable text.
Barcode data is “BARCODE39”.
8080
Table 1: PC to Printer
Operation Command Parameter Examples UDP Port

Domino G20I Specifications

General

Brand	Domino
Model	G20I
Category	Printer
Language	English