(34) EPT052026 Issue 1 February 2019
Set repeat
counter, spacing
barcode.
^1q01CS*x*y*z\
0
*x: Position, value is 1
(mandatory 1 character).
*y: Repeat dynamic counter.
Maximum value is 10000000
times, (mandatory 10
characters).
*z: Spacing for barcode.
Maximum value is 50pt
(mandatory 3 characters).
Note: The repeat value
applies to single
counters and
dynamic barcodes.
The spacing value
applies to static
barcodes and
dynamic barcodes.
^1q01CS10000000000025\0 =
Repeat 0 and Spacing 25pt.
Use message ^1u01CS*x\0 *x: Message number to use.
Maximum 3 characters.
Range: 1-100
^1u01CS1 = Use message 1.
The new message will be sued
after printing the current
message is stopped.
Table 2: PLC to Printer
Operation Command Parameter Examples
To Next Page
Loading...
