① Put the iTank on a flat platform, then use appropriate support to support the iTank
to make the front wheel be above the ground, and do not let it overset.
②Dismantling steps:
●Mud guard of left front wheel
●Front wheel axle decorating parts
●The lower pump of the front disc brake
Refer to "Front wheel and front disc brake system".
③ After changing the lower pump of the disc brake, install according to the order
opposite to the disassembly
3.3.5 Disassemble and change the front wheel and front disc brake plate
① Put the iTank on a flat platform, then use appropriate support to support the iTank
to make the front wheel be above the ground, and do not let it overset.
To Next Page
Loading...