Contents
Chapter 1.The vehicle information
Chapter 2 Standard component specification and general torque
Chapter 3 Dismantle and replacement of parts of the car
3.1 Disassemble and switch the covering parts
3.1.1 Schematic diagram of the covering parts
3.1.2 Procedure of dismantling and switching the covering pieces and the tools
required
3.2 Disassembling and changing of steering handle
3.2.1 Schematic diagram of the steering handle
3.2.2 Tools required to change and disassembling the steering handle base order
3.2.3 Change the steering handle base
3.3 The front wheel and front disc brake system
3.3.1 The front wheel and front disc brake system map
3.3.2 Tools needed to disassemble and switch the front wheel, front disc brake
system and the order of disassembling and switching
3.3.3 The check of front and back tyres
3.3.4 Disassemble and replace the front disc brake lower pum
3.3.5 Disassemble and change the front wheel and front disc brake plate
To Next Page
Loading...
