Doosan BC30S-5 - Hydraulic and Power Steering; System - Check

Maintenance Section
G 110
Mast Pivot Eyes – Lubricate
Typical Example
1. Lubricate two fittings for the mast pivot eyes, one
on each side of the pin.
2. Check the pivot eye pins for loose retainer bolts
and wear.
Hydraulic and Power Steering
System - Check
1. Operate the lift truck for a few minutes to warm
the oil.
2. Park the lift truck level, with the forks lowered,
mast tilted back (all cylinders retracted), parking
brake engaged, directional control lever in
NEUTRAL, and the key switch to OFF.
3. Open the hood.
4. Remove the dipstick.
5. Maintain the oil level to the full mark on the
dipstick.
6. Install the dipstick.
7. Install the access cover.