Maintenance Section
G 83
Drive Axle Oil
NOTE: Failure to follow the recommendation will
cause shortened life due to excessive gear
wear.
The API GL 4 specification or SAE 80W oils could
be used.
NOTE: Multi-grade oils are not blended by
DOOSAN for use in transmissions. Multi-
grade oils which use high molecular weight
polymers as viscosity index improvers lose
their viscosity effectiveness by permanent
and temporary shear of the viscosity index
improver and therefore, are not
recommended for transmission and drive
train compartments.
Lubricating Grease(MPGA)
Use Multipurpose Molybdenum Grease (MPGM) for
all lubrication points. If MPGM grease can not be
used, a multipurpose type grease which contains
3% to 5% molybdenum disulfide can be used.
NLGI NO.2 grade is suitable for most temperatures.
Use NLGI No.1 or No.0 grade for extremely low
temperature.
Brake Fluid
Located on the left site of the cowl.
Use heavy duty hydraulic brake fluid certified by the
oil supplier to meet ISO 6743/4 HM VG 10 latest
revision.
TOTAL Azolla ZS 10
AGIP Acer 10
BP Energol HP 10 HLP 10
CALTEX Spindurn 10
ELF Spinelf 10
ESSO Nuto H 10 Spinesso 10
FINA Hydran 10
MOBIL Velocite oil No. 6 Velocite oil E
SHELL
Tllvs oil C10
Morlina 10
To Next Page
Loading...
