Vehicle System Disassembly & Assembly 17
24. Install clamp assembly (10), pad-rubber (9),
spacers (8), plate (7) and nut (6). Bend plate (7)
supporting nut (6) not to be loosened.
NOTICE
Make lift cylinders vertical by adjusting pad-rubber
(9) and U-clamp assembly (10).
25. Install grease pipe if it was removed.
26. Install the flow regulating and bracket assembly
(5), flow protector (4) and hose (3).
27. Install bracket (2) and hose (1).
End By :
a. Install mast.