•
Remove the idle gear assembling
bolts and disassemble the idle gear
pin.
9.1.30. Fuel injection pump
•
Disassembly the oil hose for lubrica-
tion.
•
Remove the injection pump
flange assembling nuts
•
Remove the bracket fixing bolts
of injection pump, and disassem-
ble by pulling the injection pump
backward.
9.1.31. Water chamber cover
•
Remove the assembling bolts
and disassemble the water chamber
cover.
•
Remove the remnant gasket thoroughly.
- 75 -
To Next Page
Loading...
