Doosan D50C-5 Disassembly/Assembly

Vehicle Systems Disassembly & Assembly 6
Overhead Guard
Remove & Install Overhead Guard
1. Support overhead guard (1) with lifting straps and
a hoist.
2. Remove the washers, nuts, and two bolts (2).
3. Remove the washers, nuts, and two bolts (3).
4. Remove front overhead guard (1), Front overhead
guard (1) weighs approximately 30 kg (66 lb).
5. Remove the washers, nuts, and four bolts (4).
6. Remove rear Leg (5).
7. Install front overhead guard (1) and rear leg (5) in
the reverse order of removal.

Doosan D50C-5 Specifications

General

Brand	Doosan
Model	D50C-5
Category	Engine
Language	English