9.1.32. Fly wheel
•
Remove the flywheel assembling bolts
and disassemble it.
•
The bolt removal is done by the
reverse order of assembling and by
the steps.
9.1.33. Fly wheel housing
•
Remove the flywheel housing assem-
bling bolts and disassemble the
flywheel housing.
•
Disassemble the oil seal of fly-
wheel housing.
9.1.34. Injection pump drive gear
•
Remove the assembling nuts of drive
gear.
•
Remove the drive gear housing ass-
embling nuts and disassemble the
gear assembly.
9.1.35. Timing gear case
•
Remove the timing gear case assem-
bling bolts.
•
By tapping lightly with a urethane
ham-mer the right and left back of tim-
ing gear case’s connecting part, dis-
assemble the timing gear case.
- 76 -
To Next Page
Loading...
Need help?
General
