Dorma MUXD 19 - Optical Interfaces for B6 L 19; Internal Voltage; Supply Voltage

MUXD 19" (B6L 19")
4. Commissioning
17
4.4 Optical interfaces for B6L 19''
4.4.1 Internal Voltage
Monitoring the internal voltages (TP4 basic card
only)
4.4.2 Supply Voltage
Monitoring the input voltage/processing a manual
reset
LED
off
green
Meaning
At least one of the voltages generated on the
module (2.5 V; 3.3 V; 5 V) is outside the toler-
ance range. The reset signal of the module is
activated.
All the voltages generated on the module (2.5 V;
3.3 V; 5 V) are OK.
Internal Voltage
Supply Voltage
SubBus1 Activity
SubBus Power
SubBus2 Activity
Booking Activity
Tamper Status
System Run
Reset
POWER
LED
off
green
red
yellow
Meaning
The level of the input voltage is below a
minimum permitted value. Normal operation is
stopped.
Normal status. The level of the input voltage is
above a minimum permitted value.
However, there are delays in the activation of
this LED during booting of the MUXD.
A manual reset has been triggered.
–
Internal Voltage
Supply Voltage
SubBus1 Activity
SubBus Power
SubBus2 Activity
Booking Activity
Tamper Status
System Run
Reset
POWER
Internal Voltage
Supply Voltage
SubBus1 Activity
SubBus Power
SubBus2 Activity
Booking Activity
Tamper Status
System Run
Reset
ext. POWER
LAN-Activity
RS232 Service
LAN 10/100 BaseTx
LAN Link / Speed