ES 200 EASY PLUS
—
7
10. UKCA Declaration of incorporation
This declaration is issued under the sole responsibility of the
manufacturer.
The undersigned representing the following manufacturer
dormakaba Deutschland GmbH
DORMA Platz 1, 58256 Ennepetal, Germany
declares that the partly completed machine(s)
ES 200 EASY, ES 200, ES 200 2D, ES 200 EASYPLUS,
ES 200 2D FIA, ES 200 CO48
complies with the following basic requirements of the Supply
of Machinery (Safety) Regulations 2008 – Annex I, Section:
1.1.3, 1.1.5, 1.2.1, 1.2.3, 1.2.5, 1.2.6, 1.3.2, 1.3.3, 1.3.4,
1.3.8.1, 1.3.9, 1.5.1, 1.5.2, 1.5.4- 1.5.10, 1.5.16, 1.6.1,
1.6.2, 1.6.3, 1.6.4, 1.7.1.1, 1.7.3, 1.7.4
The partly completed machine further complies with all
relevant provisions of the Electromagnetic Compatibility
Regulations 2016 and the Electrical Equipment (Safety)
Regulations 2016.
It may be incorporated and operated in automatic door
control mechanisms in conformity with the Supply of
Machinery (Safety) Regulations 2008 provided that the
manufacturer of the systems ensures that all requirements
under the Supply of Machinery (Safety) Regulations 2008
are met and an UKCA Declaration of Conformity has been
issued.
The specific technical documentation was prepared and is
available from the Product Compliance Manager at
product-compliance.dach@dormakaba.com.
It will be electronically forwarded to individual public
authorities in response to a duly reasoned request.
11. Disassembly, recycling and disposal
The disassembly is carried out in the reverse order of the
installation manual and must be carried out by qualified
personnel.
De-energize the product
before the disassembly.
Dispose the product in an environmentally friendly
manner. Electronic parts and batteries may not be
disposed via the general trash.
Take them to an appropriate collection point for
disposal.
Always comply with the applicable national legal provisions.
To Next Page
Loading...
