Doro 4100H - Software update

English
4. Wait for the search to display the wanted device and press Stop when
found to stop the search.
5. Select the wanted device and press Pair to connect. When connecting
to another Bluetooth device you may need to enter a password or
confirm a shared key.
6. You can also see the list of already paired devices. Select the device
and press for device options.
• Connect/Disconnect to connect/disconnect with the selected
device. This may require a profile, usually a headset.
• Rename to edit the name of the paired Bluetooth device.
• Delete to delete the device from the list.
• Delete all to delete all devices from the list.
• Device details to view detailed information about the device, e.g.
device number (MAC address), device type, and supported serv-
ice (Bluetooth profiles).
Add new device
Search and pair available Bluetooth devices in your proximity.
1. Press Menu Settings Bluetooth Add new device.
2. Make sure that the device you want to connect with is visible and in
pairing mode.
3. Wait for the search to display the wanted device to select it and press
OK to connect. When connecting to another Bluetooth device you
may need to enter a password or confirm a shared key.
Device name
1. Press Menu Settings Bluetooth Device name.
2. DFO-0450 is displayed.
3. Edit the new name.
4. Press Save to save and your new name should appear for other Blue-
tooth devices.
Software update
Check for software updates on a regular basis. When a new system soft-
ware is available, a notification message is shown. Press Software update
Software update to check if there’s a software update available and
perform it. Select it to start downloading. The download time may vary de-
pending on Internet connection. We recommend that you always update
28