English
Volume control
Use the up (V+) and down (V-) buttons to adjust the sound volume.
• During a call the volume keys adjusts the call volume.
• From standby it adjusts the loudspeaker volume.
See also Adjust volume , p.29 for more information.
Silent mode
You can also set your device to silent mode: press and hold
#
until ap-
pears. To re-enable ring and message tones, press and hold
#
until dis-
appears. See also Ring type, p.30 to switch off notification sounds.
Enter text
Enter text manually
Select character
• Press a numerical key repeatedly until the desired character is shown.
Wait a few seconds before entering the next character. Press Clear to
erase characters.
Special characters
1. Press
*
for a list of special characters.
2. Select the desired character using the Four-way navigation keys and
press OK to enter it.
Move the cursor within text
• Use the Four-way navigation keys to move the cursor within the text
Upper case, lower case, numerals and predictive text
• Press
#
to choose between predictive text, sentence case, lower
case, upper case and numerals. To use predictive text the wanted lan-
guage needs to be selected, see next or Writing language, p.21.
Enter text with predictive text
In some languages you can use predictive text input method which uses a
dictionary to suggest words.
• Press each numerical key once, even if the displayed character is not
the one you want. The dictionary will suggest words based on the keys
you have pressed.
6
To Next Page
Loading...
