Doro 5861 - Receive a Call; Call Information; Call Options

English
Receive a call
1. Press to answer.
Press to reject the call (busy signal).
2. Press to end the call.
Tip: Press + or – to temporarily switch off the ring signal.
Call information
During a call, the outgoing or incoming phone number and the elapsed call
time is displayed. If the identity of the caller is withheld or unknown, Pri-
vate or Unknown are displayed.
Call options
Mute
During a call, press Mute to disable the microphone. Press Un-
mute to re-enable the microphone.
Loudspeaker
During a call, press the right softkey Speaker to activate loudspeaker
mode. Speak clearly into the phone microphone at a maximum distance of
1 m. Press the right softkey Speaker to deactivate loudspeaker mode.
Options
During a call the options button ( ) give access to additional functions.
• Add call to call another number. When the second party is connected
you can again press and then press:
• Merge calls/Split call conference to merge the two calls into a
conference call and then split them again if needed.
• Swap to swap between the two calls.
• Transfer to merge the two calls and disconnect yourself.
• Hold call/Retrieve call to hold/retrieve the current call.
• Mute to disable the microphone. See above.
• End single call to end the current call (same as ).
• End all calls to end all current calls.
Note! For settings related to calling, see Calls, p.37
12