English
Receive a call
1. Open the flip and press to answer.
Alternatively press Silent to switch off the ringsignal
or press
/close the flip to reject directly (busy signal).
2. Press
to end the call.
To answer an incoming call by opening the flip, see Answer mode, p.13.
Tip: Press and hold +/– to temporarily switch off the ringsignal without
opening the flip.
Volume control
During a call
• Use the side buttons +/– or
/ to adjust the sound volume.
The volume level is indicated on the display.
If you use a hearing aid or have hearing difficulties when using the tele-
phone in a noisy environment, you can adjust the phone's audio settings,
see Audio setup
, p.36.
Silent
Silent is a fixed profile with Keypad tone, Message tone and Ringtone dis-
abled, while Vibration, Tasks, Daily reminder and Alarm are unchanged.
• Press and hold shortcut button
#
to activate or deactivate silent
mode.
Headset
When a headset is connected, the internal microphone in the phone is
automatically disconnected. If available, use the answer key on the head-
set to answer and end calls.
CAUTION
Using a headset at high volume may damage your hearing. Adjust the
volume level carefully when using a headset.
11
To Next Page
Loading...
