Doro 6031 - Call Waiting, Divert, and Caller ID

English
• Open to answer � On to answer incoming calls by opening the
flip.
• Any key � On to be able to answer incoming calls by pressing
any key (exemption
).
2. Press OK to confirm.
Call waiting
You can handle more than one call at a time, put the current call on hold
and answer the incoming call. When activated, an alert tone is heard if
there is an incoming call while talking.
• During a call, press Options � Answer.
Activate call waiting
1. Press Menu � Settings � Calls � Call setup.
2. Select Call waiting � Activate.
3. Press OK to confirm.
Tip: Repeat and select Deactivate to disable call waiting, or Query status
to display if call waiting is active or not.
Call divert
You can divert calls to an answering service or to another phone number.
Set up which calls should be diverted. Select a condition and press OK,
then select Activate, Deactivate or Query status for each.
1. Press Menu � Settings � Calls � Call setup � Call divert:
• Voice calls to divert all voice calls.
• Unreachable to divert incoming calls if the phone is turned off
or out of range.
• No reply to divert incoming calls if unanswered.
• If busy to divert incoming calls if the line is busy.
• Cancel diverts to cancel all call divert settings.
2. Press OK to confirm.
Caller ID
Display or hide your phone number on the recipient's phone when you
call.
1. Press Menu � Settings � Calls � Call setup � Caller ID:
14