2. Enter the alarm time using the keypad and press OK to confirm.
• Select Single, for a single occurrence,
• Select Repeated, for a repeated alarm.
Scroll through the list of days and press On
or Off to enable or to disable the alarm for
each day.
3. When done, press Save.
4. When the alarm goes off a signal will sound.
Press Stop to turn off the alarm or press Snooze to repeat the alarm after 9 minutes.
Note! The alarm will work even when the phone is switched off. Do not power on if wireless phone use is prohibited or
when it may cause interference or danger.
Reset settings
1. Press Menu Settings Security.
2. Select Reset settings to reset the phone settings. All the changes that you have made to the phone settings will be
reset to default settings.
3. Enter the phone code and press OK to reset.
Tip: The default phone code is 1234.
Reset all
1. Press Menu Settings Security.
2. Select Reset all to delete phone settings and content such as contacts, number lists, and messages (SIM
memory is not affected).
3. Enter the phone code and press OK to reset.
Tip: The default phone code is 1234.
TROUBLESHOOTING
The phone cannot be switched on
Battery charge low
Connect the power adapter and charge the
battery.
Battery incorrectly installed Check the installation of the battery.
Failure to charge the battery
Battery or charger damaged Check the battery and charger.
Battery recharged in temperatures < 0°C or >
40°C
Improve the charging environment.
Failure to charge the battery
Charger incorrectly connected to phone or
power socket
Check the charger connections.
PIN code not accepted
Wrong PIN code entered too many times
Enter the PUK code to change the PIN code, or
contact the service provider.
To Next Page
Loading...
