English
1. Press Menu Settings Connected devices Bluetooth
Pair new device.
2. Make sure that the device you want to connect with is visible and in
pairing mode.
3. Wait for the search to display the wanted device to select it and press
to connect. When connecting to another Bluetooth device you
may need to enter a password or confirm a shared key.
Bluetooth address
Here you can see the Bluetooth address of your phone.
USB connection
USB storage is enabled by default and allows a computer or device con-
nected using a USB-cable to access files on this phone. You can change that
with the following settings.
1. Press Menu Settings Connected devices USB.
2. Set the wanted setting:
• Charge this device to only allow charging.
• Transfer files to allow access to the file system of the phone. Ap-
ple’s Mac OS X doesn’t include MTP support. Visit Android File
Transfer to download a file transfer application for Mac OS X.
• Transfer photos (PTP) to appears to the computer as a digital
camera. In this mode, your phone will work with digital camera
applications that support PTP but not MTP. Apple’s Mac OS X
does support PTP, so you can use PTP mode to transfer photos to
a Mac over a USB connection without any special software.
• Use device as MIDI to connect the phone as a MIDI device (Musi-
cal Instrument Digital Interface is a technical standard that de-
scribes a communications protocol, digital interface, and
electrical connectors that connect a wide variety of electronic
musical instruments, computers, and related audio devices for
playing, editing and recording music).
3. Press to confirm.
Battery
See your phone’s battery status and activate power saving mode.
56
To Next Page
Loading...
