English
Select mode:
• High accuracy: for best location accuracy. This uses every service
available: GPS, Wi-Fi, Bluetooth, and/or mobile networks in what-
ever combination available. This is quite battery consuming.
• Battery saving: to reduce battery consumption by disabling GPS.
This mode uses less battery-intensive location sources (Wi-Fi,
Bluetooth, and/or nearby mobile) to figure out where you are us-
ing location services. This will not be as accurate as using GPS.
• Device only: this mode relies solely on the GPS. This means it will
work in places where you won't find enough Wi-Fi, cellular tow-
ers, and Bluetooth beacons to get a proper location.
SIM card lock
1. Press Menu Settings Security & location SIM card
lock select SIM card (if applicable).
• Set the switch to activate the PIN code. You need to enter
the PIN code every time the phone is started.
• Set the switch to deactivate the PIN code.
IMPORTANT!
If you deactivate the PIN code and the SIM card is lost or stolen,
it is unprotected and must be blocked by your service provider.
2. Press Change SIM PIN to change you SIM PIN code.
3. Enter the old PIN and press OK.
4. Enter new PIN and press OK. Enter new PIN again and select OK once
more. When done, SIM PIN changed successfully will appear.
Start-up Wizard
You can run the start-up wizard anytime you want.
Press Menu Settings Start-up Wizard and select the subject
you want to change.
Tutorials
Here are some useful tutorials for various features.
Press Menu Settings Tutorials.
62
To Next Page
Loading...
