7
DORO CARE FOR TECHNICAL HELP SEE PAGE 10
RECORDING A VOICE MESSAGE
# The telephone handset can be on or off the base.
# Press and hold down REC (located under the right hand flap).
# Release the button when you hear a short tone.
# Speak clearly towards the base unit or handset (if lifted) microphone.
# To terminate your recording press STOP.
# Replace the handset if in use.
TO CHECK YOUR VOICE MESSAGE
# Press and release the REC button.
DIRECT MEMORY BUTTONS/CALL LIST
# The telephone has four direct memory buttons, M1, M2, M3 and M4.
# The phone will dial the memories in turn (M1 - M4) when the alarm function is
activated.
# For reference a picture or symbol can be placed under the sliding cover.
# The people whose numbers are programmed into memory should be advised on the
Alarm Response Options available when they receive a call from the DORO
CARE.
STORING DIRECT MEMORIES:
# Press the programme button .
# Enter the telephone number you wish to store (max 16 digits).
# Press the programme button again.
# Select the memory location M1 - M4.
MEMORY DIALLING USING THE HANDSET:
# Lift the telephone handset and wait for dial tone.
# Press the required memory button (M1-M4). The required telephone number will
be dialed.
# Replace the handset once the call is finished.
MEMORY DIALLING USING THE SPEAKER PHONE:
# Press the memory button (M1-M4).
# The speaker phone will activate and the required telephone number will be dialed.
# Press the speaker phone button when the call is finished.
ADDITIONAL NETWORK SERVICE
Additional PBX or network operator services can be accessed using the R button. The
telephone supports Timed Break recall operation.
To Next Page
Loading...
