EasyManua.ls Logo

Doro CARE - Alarm and Messaging Features; Alarm Function Activation; Remote Alarm Button; Alarm Response Options

Doro CARE
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
DORO CARE FOR TECHNICAL HELP SEE PAGE 10
ALARM FUNCTION
# The alarm activates by the pressing and holding the alarm button for
2 seconds, on either the telephone, or remote alarm.
# If the alarm function is accidently triggered, press and hold the STOP
button, until the telephone alarm button illuminates Green.
# A corded alarm button may also be installed, please refer to page 8 for
further details.
# All telephone numbers will be dialled (M1 - M4) until someone answers, at
which point your recorded message will be played.
# If the person called then presses the # button, this will activate the DORO
CARE hands free function. (REFER TO WARNINGON PAGE 4).
# If there is no response the DORO CARE will wait for 60 seconds before
dialing the next memory number.
# The memories will be dialled for up to 14 times.
# Several of these functions can be adjusted, please refer to the advanced
alarm settings on page 8.
REMOTE ALARM BUTTON
A remote alarm button is supplied and can be carried by
# A Belt clip.
# A Neck-strap.
# An Arm-strap.
You must install a quality Alkaline battery (1 x 12v type 23A) for the remote button
to function.
ALARM RESPONSE OPTIONS
There are three alternative options available to the person being called.
# Press # - To connect to the speaker phone and terminate the voice message. After
approximately 3 minutes you will hear a warning tone, press # again to continue
the call for 3 minutes. Press the * button to terminate the call.
# Press * - To turn off the alarm and terminate memory dialing.
# Press nothing - After 60 seconds the telephone will dial the next memory number.
VOICE MESSAGE
If the alarm function is triggered a Voice message (30 seconds maximum) will be
played.
Example messages:
# -"This is Simon Smith at 10 Bridge street in London. I need help. Press # to
connect this call to speakerphone operation".
# -"This alarm is from the store at 10 Bridge street in London. We are in trouble
and need help immediately. Press * to confirm you have received this message to
stop this telephone dialling other people".

Related product manuals