4
DORO CARE FOR TECHNICAL HELP SEE PAGE 10
SPEAKERPHONE FUNCTION
You may upon connection of the telephone, or, upon moving it to another network
telephone socket, find the speakerphone function initially will not operate. This can be
overcome by lifting the handset for 2-3 seconds. The speakerphone will not operate
if the backup batteries and mains power adaptor (PSU) are not installed.
MAKING A CALL BY USING THE HANDSET
# Lift the handset and wait for the dial tone. Adjust the earpiece volume control.
# Dial the required telephone number.
# To terminate the call replace the handset.
If you wish to switch to the speakerphone during the call, press the speakerphone
button and replace the handset.
MAKING A CALL BY USING THE SPEAKERPHONE
# Press the speakerphone button and adjust the speaker volume.
# Dial the required telephone number.
# Speak clearly towards the microphone located at the front of the telephone.
# Press the speakerphone button again to terminate the call.
If you wish to switch to the handset during the call, lift the handset and continue your
conversation
.
IMPORTANT!
Please note: While using the speakerphone function, the stronger speech signal will be
given priority, ie both parties will NOT be able to talk at the same time.
Please ensure that if the speakerphone function is to be used, that the telephone is not
installed into a noisy enviroment.
WARNING!
Please note: The microphone for the hands free speaker will only detect voice within
its immediate proximity, the further you move away from the unit, or if you are out of
the room location, will result in no communication being possible.
LAST NUMBER REDIAL
If the telephone number you call is busy or you wish to redial it again, you do this
by lifting the handset and pressing the redial button .
To Next Page
Loading...
