Why does my Doro DFB-0250 have echo or noise during calls?
If you're experiencing echo or noise on your Doro Cell Phone during calls, it might be a regional problem caused by a bad network relay. Hang up and redial; this may switch you to another network relay.
What to do if my Doro DFB-0250 Cell Phone says 'PIN code not accepted'?
If your Doro Cell Phone says 'PIN code not accepted', it means the wrong PIN code has been entered too many times. Enter the PUK code to change the PIN code, or contact your service provider.
What to do if my Doro DFB-0250 Cell Phone won't turn on?
If your Doro Cell Phone won't turn on, it could be due to a low battery charge. Connect the power adapter and charge the battery for 3 hours. Note that full battery capacity is reached after the battery has been charged 3–4 times. Alternatively, the battery might be incorrectly installed, so check its installation.
Why is my Doro DFB-0250 failing to send or download MMS?
If your Doro Cell Phone fails to send or download MMS, it could be because the phone memory is full. Delete received MMS or select to set the default storage for MMS to be saved on a memory card (not included). Alternatively, the incorrect MMS profile might be selected. For some service providers, the MMS profile has to be selected manually.
Why can't I send or receive Picture Messages / MMS with my Doro Cell Phone?
If your Doro Cell Phone is unable to send or receive Picture Messages / MMS with the SIM card, the MMS profile may not be set automatically. For some operators, the MMS profile has to be selected manually. Activate the correct profile to suit your SIM card or network used.
How to fix failure to add a contact on Doro DFB-0250 Cell Phone?
If you are unable to add a contact to your Doro Cell Phone, the phonebook memory might be full. Delete contacts to free up memory.
Why does the standby time decrease on my Doro DFB-0250 Cell Phone?
If the standby time of your Doro Cell Phone is decreasing, it could be due to a low battery charge capacity. Install a new battery. It could also be that you are too far from the base station, causing the phone to constantly search for a signal, which consumes battery power. Find a place with a stronger signal, or temporarily turn off the phone.
What to do if my Doro DFB-0250 Cell Phone shows a SIM card error?
If your Doro Cell Phone displays a SIM card error, it could be due to several reasons: * The SIM card might be damaged; in this case, check its condition and contact your service provider if needed. * The SIM card might be incorrectly installed; check the installation, remove the card, and reinstall it. * The SIM card might be dirty or damp; wipe the contact surfaces with a clean cloth.
Why is my Doro Cell Phone battery not charging?
If your Doro Cell Phone fails to charge, there might be several reasons: * The battery or charger could be damaged, so check them. * The charging environment might not be suitable, as the battery should only be charged in temperatures between 0 °C and 40 °C, so improve the charging environment. * The charger might be incorrectly connected to the phone or power socket, so check the charger connections.
Why can't I place calls on my Doro DFB-0250?
If you're unable to place calls on your Doro Cell Phone, call barring might be activated. Deactivate call barring in your phone's settings. If the problem persists, it's best to contact your service provider for further assistance.
General| Bluetooth | Yes |
|---|---|
| SIM | Mini-SIM |
| Display | 2.4" TFT, 240 x 320 pixels |
| Expandable Memory | microSD |
| Camera | VGA |
| Network | GSM 900 / 1800 |
| USB | Micro-USB |
| Colors | Black |
To Next Page
