Doro SECURE 350 - Page 15

English
The call log will store the last 15 incoming and 15 outgoing calls. On the
display, incoming (answered and unanswered) calls are indicated with
and outgoing calls with . Received calls are stored chronologically.
When the memory is full, the oldest number will be deleted automatically
as each new call is logged. The number and time of each call is displayed.
For calls older than 24 hours, the date of the call is displayed instead of
the time.
If the Call indicator function N CALL LED (
) = ON, a red blinking light
indicates that an unanswered call has been received since the call log
was last checked.
Messages
Apart from phone numbers, the display can show:
NO NUMBER No information received, e.g. an international call.
PRIVATE
The call comes from a withheld number or a PBX.
T
New (missed call) number received.
MSGWAITING Message indication (sent from your network operator)*.
*Message indication can be deleted manually by pressing down
for a few seconds in standby mode.
Deleting numbers from the call log
1. Press
.
2. Use v/V to select desired number.
3. To delete single contacts, press
. DELETE ? is displayed. Press
for two seconds.
4. To delete all contacts in the Phonebook, press and hold
until
DEL ALL? is displayed.
5. Press
until (two seconds) EMPTY is displayed.
Note! This deletes the Caller ID memory, not the Phonebook memory.
Transferring numbers to the Phonebook
1. Press
.
2. Use v/V to select desired number.
12