Doseuro Rapida 2.0 - Page 2

XMPI0MTIRPD2ST021 2/24 Ed. 2021
ATTENTION!
Any installation, de-installation or maintenance operation described in this
manual must be carried out in strict compliance with the laws in force regarding
"safety at work": the indications given here are of a general nature and cannot
take into account the specific nature of each installation. It is therefore
recommended that the safety requirements applicable to the context in which
operations take place are strictly observed.
IF THERE IS A CONFLICT BETWEEN THE POSSIBILITY OF CARRYING OUT ANY OF THE
OPERATIONS DESCRIBED IN THIS MANUAL AND THE WORK SAFETY REQUIREMENTS
(LAID DOWN BY LAW OR BY THE PERSON IN CHARGE OF THE PREMISES WHERE THE
OPERATIONS ARE CARRIED OUT), COMPLIANCE WITH THE SAFETY REQUIREMENTS
MUST UNDOUBTEDLY PREVAIL.
DOC. NO.:
XMPI0MTIRPD2ST021
Rev.
01
LANGUAGE:
EN
Date:
04/06/2020
Drawn up by:
Luca FUMAGALLI
Checked by:
Luca FUMAGALLI
Repl. On:
-
Rev.
Description
Checked by
Date
00
New Doseuro format issue
L. FUMAGALLI
23/04/2021
01
Correction Ch.3, tA up to 45°C
L. FUMAGALLI
11/05/2021
This manual refers to the following products:
Inverter motor “Rapida 2.0 02”
Inverter motor “Rapida 2.0 03”
Inverter motor “Rapida 2.0 05”
Inverter motor “Rapida 2.0 07”